home *** CD-ROM | disk | FTP | other *** search
-
- Summary Information - Command Line
-
- -SFilename.Drv - Set soundcard driver
-
- -Sxx Quick set sound card
- 0 = No Sound
- 1 = PC Speaker
- 2 = Sound Blaster 1.xx
- 3 = Sound Blaster 2.xx
- 4 = Sound Blaster Pro
- 5 = Sound Blaster 16
- 6 = Sound Blaster AWE 32
- 7 = Gravis UltraSound
- 8 = Interwave IC
- 9 = Pro Audio Spectrum
- 10 = Pro Audio Spectrum 16
- 11 = Windows Sound System
- 12 = ESS ES1868 AudioDrive
- 13 = EWS64 XL Codec
- 19 = Generic MPU401 driver
- 20 = Disk writer device
-
- -Axxx Set sound card's address (hexadecimal)
- -D# Set DMA channel (decimal)
- -I## Set IRQ number (decimal)
-
- -M##### Set mixing speed (decimal)
- -L### Limit number of channels
-
- -C Control playback in DOS Shell (with Grey +/-, Right Alt & Right Ctrl)
- -F Disable file-colour distinctions
- -K Exchange F1 and F11 keys
- -Px Pattern memory allocation strategy.
- -P0 = Try to store patterns in conventional memory first, EMS is
- only used once conventional memory runs out.
- Not recommended, but those of you who use IT in Windows 3.xx
- should try this option if you get EMS errors. (I recommend
- that you don't use IT under Windows 3.xx at all)
- -P1 = Use one block of EMS for all patterndata.
- This is the most memory efficient of all the pattern
- storage modes - (this is also the default)
- -P2 = Use EMS blocks for each pattern
- This is a VERY wasteful but 'safe' memory allocation scheme.
- -R Reverse channels (flip left-right), same as Alt-R on the info page.
- -T1 Disable usage time indication
- -T2 Enable timeslice release
- -V1 Override VGA detection/Matrox detection.
- -V2 Force matrox compatibility mode (use with -v1)
- -X1 Disable internal MMTSR
- -X2 Disable mouse
-
-
- Summary Information - Effects, alphabetically
-
- Volume Column Effects
- Ax - Volume slide up
- Bx - Volume slide down
- Cx - Fine volume slide up
- Dx - Fine volume slide down
- Ex - Pitch slide down
- Fx - Pitch slide up
- Gx - Portament to
- Hx - Vibrato with speed x
-
- General Effects
- Axx - Set speed (set number of frames per row)
- Bxx - Jump to order
- Cxx - Break to row xx of (next) pattern
- Dxy - Volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
- Exx - Pitch slide down by xx
- EFx - Fine pitch slide down by x
- EEx - Extra fine pitch slide down by x
- Fxx - Pitch slide up by xx
- FFx - Fine pitch slide down by x
- FEx - Extra fine pitch slide down by x
- Gxx - Portamento to note with speed xx
- Hxy - Vibrato with speed x, depth y
- Ixy - Tremor with ontime x, offtime y
- Jxy - Arpeggio with halftones x and y
- Kxy - Dual command: H00 and Dxy
- Lxy - Dual command: G00 and Dxy
- Mxx - Set channel volume to xx (0->40h)
- Nxy - Channel volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
- Oxx - Set sample offset to xx00h
- Pxy - Panning slide, x=0 right; y=0 left; x=F fine right; y=F fine left
- Qxy - Retrigger note every y frames with volume modifier x
- Values for x:
- 0: (nothing) 4: -8 8: (nothing) C: +8
- 1: -1 5: -16 9: +1 D: +16
- 2: -2 6: *2/3 A: +2 E: *3/2
- 3: -4 7: *1/2 B: +4 F: *2
- Rxy - Tremelo with speed x, depth y
- S3x - Set vibrato waveform
- S4x - Set tremelo waveform
- S5x - Set panbrello waveform
- Waveforms for x in S3x, S4x and S5x:
- 0 = Sine 2 = Square
- 1 = Ramp down 3 = Random
- S6x - Pattern delay for x frames
- S7x - Instrument functions
- Values for x in S7x:
- 0: Past note cut 5: Set NNA to note off
- 1: Past note off 6: Set NNA to note fade
- 2: Past note fade 7: Turn off volume envelope
- 3: Set NNA to note cut 8: Turn on volume envelope
- 4: Set NNA to continue
- S8x - Set pan position
- S91 - Set surround sound
- SB0 - Set loopback point
- SBx - Loop x times to loopback point
- SCx - Note cut after x frames
- SDx - Note delay for x frames
- SEx - Pattern delay for x rows
- SFx - Select parameterised MIDI Macro
- T0x - Tempo slide down by x
- T1x - Tempo slide up by x
- Txx - Set tempo (20h->0FFh)
- Uxy - Fine vibrato with speed x, depth y
- Vxx - Set global volume to xx (0->80h)
- Wxx - Global volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
- Xxx - Set panning position (0->0FFh)
- Yxy - Panbrello with speed x, depth y
- Zxx - MIDI Macro - check MIDI.TXT
-
- Summary Information - Effects, categorically
-
- Note: Not all effects are listed here.
-
- Speed Control
- Axx - Set speed
- T0x - Tempo slide down by x
- T1x - Tempo slide up by x
- Txx - Set tempo (20h->0FFh)
- S6x - Pattern delay for x frames
- SEx - Pattern delay for x rows
-
- Position Control
- Bxx - Jump to order
- Cxx - Break to row xx of (next) pattern
- SB0 - Set pattern loopback point
- SBx - Loop pattern x times
-
- Volume Control
- Dxy - Volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
- Ixy - Tremor with ontime x, offtime y
- Mxx - Set channel volume to xx (0->40h)
- Nxy - Channel volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
- Vxx - Set global volume to xx (0->80h)
- Wxx - Global volume slide, x=0 down; y=0 up; x=F fine down; y=F fine up
- Rxy - Tremelo with speed x, depth y
- S4x - Set tremelo waveform
-
- Panning Control
- Xxx - Set panning position (0->0FFh)
- S8x - Set pan position
- S91 - Set surround sound
- Pxy - Panning slide, x=0 right; y=0 left; x=F fine right; y=F fine left
- Yxy - Panbrello with speed x, depth y
- S5x - Set panbrello waveform
-
- Pitch Control
- Exx - Pitch slide down by xx
- EFx - Fine pitch slide down by x
- EEx - Extra fine pitch slide down by x
- Fxx - Pitch slide up by xx
- FFx - Fine pitch slide down by x
- FEx - Extra fine pitch slide down by x
- Gxx - Portamento to note with speed xx
- Hxy - Vibrato with speed x, depth y
- Uxy - Fine vibrato with speed x, depth y
- S3x - Set vibrato waveform
- Jxy - Arpeggio with halftones x and y
-
- Summary Information - Pattern Editor 1
-
- Data Entry
- Alt-0 -> Alt-9 Set skipvalue to 0-9
- . (period) Clear field(s)
- 1 Note cut (^^^)
- ` Note off (═══) / panning toggle (in volume column)
- Spacebar Use last (default) note/instrument/volume/effect/effectvalue
-
- │ │ ││ │ │ │ ││ ││ │ │ │ ││ │ │ │ ││ ││ │ │ │ ││ │ │
- │ │ ││ │ │ │ ││ ││ │ │ │ ││ │ │ │ ││ ││ │ │ │ ││ │ │
- │ │S││D│ │ │G││H││J│ │ │2││3│ │ │5││6││7│ │ │9││0│ │
- │ └┬┘└┬┘ │ └┬┘└┬┘└┬┘ │ └┬┘└┬┘ │ └┬┘└┬┘└┬┘ │ └┬┘└┬┘ │
- │ Z│ X│ C│ V│ B│ N│ M│ Q│ W│ E│ R│ T│ Y│ U│ I│ O│ P│
- └──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┴──┘
-
- Pattern selection
- +, - Next/Previous pattern (*)
- Shift +, - Next/Previous 4 patterns (*)
- Ctrl +, - Next/Previous order's pattern (*)
-
- Miscellaneous
- Enter Get default note/instrument/volume/effect
- '<' or Ctrl-Up Decrease instrument
- '>' or Ctrl-Down Increase instrument
- Grey '/' Decrease octave
- Grey '*' Increase octave
- ',' (comma) Toggle edit mask for current field
-
- Ins/Del Insert/Delete a row to/from current channel
- Alt-Ins/Del Insert/Delete an entire row from pattern (*)
- Alt-N Toggle Multichannel
- 2*Alt-N Multichannel selection menu
- Alt-Enter Store pattern data
- Alt-Backspace Revert pattern data (*)
- Ctrl-Backspace Undo - any function with (*) can be undone.
-
- Ctrl-F2 Set (multiple) pattern length
-
- Cursor Control
- Up/Down Move up/down by the skipvalue
- Ctrl-Home/End Move up/down by 1 row
- Alt-Up/Down Slide pattern up/down by 1 row
- Alt-Left/Right Move forwards/backwards one channel
- Ctrl-Left/Right Move left/right between track columns
- Tab/Shift-Tab Move forwards/backwards to note column
- PgUp/PgDn Move up/down by n lines (n=Row hilight major)
- Ctrl-PgUp/PgDn Move to top/bottom of pattern
- Home Move to start of column/start of line/start of pattern
- End Move to end of column/end of line/end of pattern
- Backspace Move to previous position (accounts for Multichannel)
-
- Ctrl-C Toggle centralise cursor option.
-
- Track View Functions
- Alt-T Cycle current track's view
- Alt-R Remove all track views
- Alt-H Toggle track-view divisions
- Ctrl-0 Deselect current track
- Ctrl-1 - Ctrl-5 View current track in scheme 1-5
- Ctrl-Left/Right Move left/right between track columns
-
- Left-Ctrl &
- Left-Shift 1-4 Quick setup view scheme (and enable cursor-tracking)
-
- Ctrl-T Toggle view-channel cursor tracking
-
- Summary Information - Pattern Editor 2
-
- Block functions.
- Shift-Movement Mark block
- Alt-B Mark beginning of block
- Alt-E Mark end of block
- Alt-D Quick mark n/2n/4n/... lines (n=Row Hilight Major)
- Alt-L Mark entire column/pattern
-
- Alt-U Unmark block/release clipboard
-
- Alt-Q Raise notes by a semitone (*)
- Alt-A Lower notes by a semitone (*)
-
- Alt-S Set instrument (*)
- Alt-V Set volume/panning (*)
- Alt-W Wipe volume/panning not associated with a note/instrument (*)
- Alt-K Slide volume/panning column (*)
- 2*Alt-K Wipe all volume/panning controls (*)
- Alt-J Volume amplifier (*) / Fast Volume attenuate (*)
- Alt-Z Cut block (*)
- Alt-X Slide effect value (*)
- 2*Alt-X Wipe all effect & effect value data (*)
-
- Alt-C Copy block into clipboard
- Alt-P Paste data from clipboard (*)
- Alt-O Overwrite with data from clipboard (*)
- Alt-M Mix data from clipboard with pattern data (*)
-
- Alt-F Double block length (*)
- Alt-G Halve block length (*)
-
- Alt-I Select template mode / Fast volume amplify (*)
- Ctrl-J Toggle fast volume amplification with Alt-J/Alt-I
-
- Playback functions
- 4 Play note under cursor
- 8 Play row
-
- Ctrl-F6 Play pattern from current row
- Ctrl-F7 Set/Clear playback mark (for use with F7)
-
- Alt-F9 Toggle current channel on/off
- Alt-F10 Solo current channel on/off
-